Gravel Volume Calculator

Estimate the volume and weight of gravel needed to cover an area to a chosen depth. Enter length, width and depth, then add an allowance for waste.…

8
Daily Uses

8 of 8 free uses remaining today

Estimate the volume and weight of gravel needed to cover an area to a chosen depth. Enter length, width and depth, then add an allowance for waste. Uses a typical density of 1.6 tonnes per cubic metre.

Enter your values

Each successful calculation counts toward this tool’s 8 free daily uses. Values stay in your browser.

Worked example

Example calculated from the starting values. Enter your own values and press Calculate to get your result.

Volume needed1.42 m³
Approximate weight2.27 tonnes

With the default inputs (length = 6 m, width = 3 m, depth = 75 mm, waste allowance = %5), the results are: volume needed 1.42 m³; approximate weight 2.27 tonnes.

Quick reference: length vs result

Reference table based on the example values; it is not your calculation result.

Length (m)Volume neededApproximate weight
30.71 m³1.13 tonnes
61.42 m³2.27 tonnes
122.84 m³4.54 tonnes
307.09 m³11.34 tonnes
6014.18 m³22.68 tonnes
12028.35 m³45.36 tonnes

Frequently asked questions

What formula does this calculator use?

Volume needed = length × width × depth ÷ 1000 × (1+waste ÷ 100); Approximate weight = vol × dens. Variables: length = length in m, width = width in m, depth = depth in mm, waste = waste allowance in %. Fixed values: dens = 1.6.

What do I need to enter?

You need length (m), width (m), depth (mm), waste allowance (%). Results update as you type.

What is an example result?

With the default inputs (length = 6 m, width = 3 m, depth = 75 mm, waste allowance = %5), the results are: volume needed 1.42 m³; approximate weight 2.27 tonnes.

What density does this use?

It assumes gravel weighs about 1.6 tonnes per cubic metre. Moisture and grade change this, so confirm with your supplier before ordering.

Related Tools

View all