Road base Volume Calculator

Estimate the volume and weight of road base needed to cover an area to a chosen depth. Enter length, width and depth, then add an allowance for…

8
Daily Uses

8 of 8 free uses remaining today

Estimate the volume and weight of road base needed to cover an area to a chosen depth. Enter length, width and depth, then add an allowance for waste. Uses a typical density of 2 tonnes per cubic metre.

Enter your values

Each successful calculation counts toward this tool’s 8 free daily uses. Values stay in your browser.

Worked example

Example calculated from the starting values. Enter your own values and press Calculate to get your result.

Volume needed1.89 m³
Approximate weight3.78 tonnes

With the default inputs (length = 6 m, width = 3 m, depth = 100 mm, waste allowance = %5), the results are: volume needed 1.89 m³; approximate weight 3.78 tonnes.

Quick reference: length vs result

Reference table based on the example values; it is not your calculation result.

Length (m)Volume neededApproximate weight
30.95 m³1.89 tonnes
61.89 m³3.78 tonnes
123.78 m³7.56 tonnes
309.45 m³18.90 tonnes
6018.90 m³37.80 tonnes
12037.80 m³75.60 tonnes

Frequently asked questions

What formula does this calculator use?

Volume needed = length × width × depth ÷ 1000 × (1+waste ÷ 100); Approximate weight = vol × dens. Variables: length = length in m, width = width in m, depth = depth in mm, waste = waste allowance in %. Fixed values: dens = 2.

What do I need to enter?

You need length (m), width (m), depth (mm), waste allowance (%). Results update as you type.

What is an example result?

With the default inputs (length = 6 m, width = 3 m, depth = 100 mm, waste allowance = %5), the results are: volume needed 1.89 m³; approximate weight 3.78 tonnes.

What density does this use?

It assumes road base weighs about 2 tonnes per cubic metre. Moisture and grade change this, so confirm with your supplier before ordering.

Related Tools

View all